^^

'contrib/comm' section


Nuand bladeRF FPGA bitstream downloader (hostedx40)

This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF x40 with the Altera Cyclone IV EP4CE40 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.


Nuand bladeRF FPGA bitstream downloader (hostedx115)

This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF x115 with the Altera Cyclone IV EP4CE115 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.


Nuand bladeRF FPGA bitstream downloader (hostedxA9)

This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF 2.0 Micro xA9 with the Altera Cyclone V 5CEBA9 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.


Nuand bladeRF firmware downloader (FX3)

This empty package will, at the time of installation, download an appropriate firmware image for using the Nuand bladeRF with a Cypress FX3 USB controller. The image will be downloaded from http://Nuand.com/fx3/ and saved to /usr/share/Nuand/bladeRF. . This bitstream will work for either the Nuand bladeRF x40 or the x115. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.


Nuand bladeRF FPGA bitstream downloader (hostedxA4)

This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V 5CEBA4 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.

/contrib/janus/janus-demos

general purpose WebRTC server/gateway - demos

janus is a general purpose WebRTC server/gateway with a minimal footprint. . This package contains a set of demo html applications using Janus. . The demos require online referenced Javascript code. . Packages gstreamer1.0-plugins-good gstreamer1.0-x are needed for included example streaming script.


S60 mobile phone management application

Series60-Remote is an application to manage your mobile phone. You can send and receive SMS messages directly on your computer. It also provides a complex contact and file management.